Presonus StudioLive Remote Manual de usuario descargar pdf (Pagina 29)

Addendum for

StudioLive Mixers

OverviewStudioLive

Remote

QMixTroubleshooting

Universal Control 1.6 with VSL 2

Universal

Control and

VSL

Link Channel Faders Preference Links Channel Faders when Channels are Stereo Linked.

When the Link Channel Faders preference is enabled, stereo linked

channels will no longer have individual control over each fader in VSL or

StudioLive Remote. This allows you to control the volume of a stereo

channel pair by moving either channel’s fader.

Default to Fader Locate Preference Activates Fader Locate on StudioLive when Fader is Moved Remotely.

With the Default to Fader Locate preference enabled, Fader Locate will

automatically engage when a fader is moved remotely in VSL or

StudioLive Remote. This preference allows you to quickly sync your

StudioLive when you return to the board.

Power User Tip: If you are remotely controlling the faders on your StudioLive, it is highly

recommended that you enable this preference. When Fader Locate Mode is activated,

the faders on your StudioLive will not be active. By allowing this mode to engage

automatically, you can avoid accidental volume jumps should you forget that a fader

was adjusted up or down in VSL or SL Remote when you go back to your StudioLive.

Talkback Assignments Enables/Disables Talkback Routing to Selected Buses.

Your StudioLive’s Talkback Assignments can be remotely controlled from

VSL. The Talkback on/oﬀ is controlled from the Talk button on the

Overview tab (see graphic in Section 2.5.2).

Remote Devices Permissions Enables/Disables Functions on Remote Devices.

Controlling VSL remotely with StudioLive Remote for iPad or QMix for

iPhone/iPod touch allows you to move about the venue freely. However,

it can also put the full power of the StudioLive in multiple hands—

some more adept than others. Therefore, VSL enables you to limit each

iOS device’s access to the mixer features by setting permissions.

Once an iOS device is connected to your wireless network and

has launched SL Remote or QMix, the device will be displayed

in the Remote Devices list on the Setup tab in VSL. Each device

will be listed using its device name so you can easily identify

which device is which. This name can be changed in iTunes

or in the General>About settings on the iOS device.

Once you have connected and conﬁgured an iOS device, the same

permissions will be set for that device every time you connect it.

VSL: Virtual StudioLive 2.5

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 63 64

Comentarios a estos manuales

Sin comentarios

Presonus StudioLive Remote Manual de usuario Pagina 29

Comentarios a estos manuales

Relacionado con productos y manuales para Software Presonus StudioLive Remote